| Memory MapsIn Figure 2-1 through Figure 2-7, the following apply:•Memory blocks are not to scale.•Peripheral Frame 0, Peripheral Frame 1, Peripheral Frame 2, and Peripheral Frame 3 memory mapsare restricted to data memory only. A user program cannot access these memory maps in programspace.•Protected means the order of Write-followed-by-Read operations is preserved rather than the pipelineorder.•Certain memory ranges are EALLOW protected against spurious writes after configuration.•Locations 0x3D 7C80–0x3D 7CC0 contain the internal oscillator and ADC calibration routines. Theselocations are not programmable by the user.•All devices with USB have 2K x16 RAM from 0x40000 to 0x40800. When the clock to the USB moduleis enabled, this RAM is connected to the USB controller and acts as the FIFO RAM. When the clock tothe USB module is disabled, this RAM is remapped to the CPU-accessible address space and can beused as general-purpose RAM |
免责声明： 以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，企业录对此不承担任何责任。如有侵犯您的权益，请来信通知删除。